# am Windows Rechner tftp.zip runterladen # but if necessary i can translate for you # the most is in german, because i posted it in a german forum # NOTE you need serial console to do this job! Maybe i can help you, i wrote a short how2 for a dualbootsystem with debian on USB stick and LEDE in nand for dockstar: Prep - OS specific prep before relocation or goĮdited 1 time(s). Ramdisk - relocate initrd, set env initrd_start/initrd_endĬmdline - OS specific command line processing/setup Issued in the order below (it's ok to not issue all sub-commands): Sub-commands to do part of the bootm sequence. Use iminfo command to get the list of existing component Must be extened to include component or configuration unit name:Īddr: - direct component image specification If you do not pass a thirdįor the new multi component uImage format (FIT) addresses To boot that kernel without an initrd image, When booting a Linux kernel which requires a flat device-treeĪ third argument is required which is the address of theĭevice-tree blob. 'arg' can be the address of an initrd image boot application image stored in memory 1 Storage Device(s) foundīootm - boot application image from memory The uboot seems to have problems with your commands: U-Boot 2014.10 (02:33:53)Seagate FreeAgent DockStarīootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rwīootcmd=setenv bootargs $ ubifsumount bootz 0x800000 Once you get to that point, if you not sure how to proceed, please post the question. Interrupt serial console and enter some envs to boot from USB. Yoiu can create the USB Debian rootfs while in OpenWrt. see some useful aliases in /root/.profileĭebian-4.12.2Ĥed5714fdb123cdb40e973f3d0754e91cd199b75a9874018f2b5dc9cfa8ae8bbĪnd remember to check the hash of what you download, as always. see LED controls in /etc/rc.local, and /etc/init.d/halt Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, and sysvinit-utils. The init system used in this rootfs is sysvinit. (But I am obviously no expert)īasic Debian stretch Kirkwood rootfs for most Kirwood plugs: I don't see, that uboot is checking any USB drives. UBI: available PEBs: 0, total reserved PEBs: 2031, PEBs reserved for bad PEB handling: 39 UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 UBI: user volume: 2, internal volumes: 1, max. UBI: good PEBs: 2031, bad PEBs: 1, corrupted PEBs: 0 UBI: VID header offset: 512 (aligned 512), data offset: 2048 UBI: attached mtd1 (name "mtd=3", size 254 MiB) to ubi0
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |